Filter
Top Products
PRE-WALK-THRU CHECKLIST
Following the instructions fully to this point,
you have successfully completed the follow-
ing checklist:
Set (if necessary) the internal inter-
com switches to correspond with
the wired intercom.
Located the BTR-300 transceiver
properly.
Connected power to BTR-300
transceiver.
Connected the antennas to the
BTR-300 with matched color codes.
Set Dynamic/Electret switches in
both BTR-300 and TR-300.
Set transmit switch on BTR-300.
Connected headsets to BTR-300
and all TR-300’s
Connected the BTR-300 to any aux-
iliary audio, intercom or external
speaker.
Installed batteries in the TR-300
Remote Transceiver.
If you missed any of the above instructions, go
back and complete that instruction before go-
ing on.
-24-