Filter
Top Products
18 Vega’s C-2002
PROG3 - Decrements the level setting by 1 dB (minimum of -60dB).
PROG4 - Saves the current level setting and returns to the SPKR menu.
7.3.2.3 Output Level Screens
Entering the TX output level screen allows for setting output levels.
7.3.2.3.1 TX Output Level
The TX output level is adjusted as shown on the display. This is an overall output gain control for the line. It can
be used to make small adjustments to the line level performance. The typical value is 0 dB.
PROG1 - Resets level setting to default of 0dBm.
PROG2 - Increments the level setting by 1 dBm (max of +10dBm).
PROG3 - Decrements the level setting by 1 dBm (min of -10dBm).
PROG4 - Saves the current level setting and returns to the Line Level
Setting screen.
7.4 System Settings Screen
This menu is entered by selecting PROG2 from the PROGRAMMING MODE menu. Once in this mode there are 5
different menus that can be entered. Each is brought up sequentially by pressing the PROG3 button labeled next on
the display.
PROG1 - Clock Set Routines.
PROG2 - Dump setup memory to another console.
PROG3 - Next Menu.
PROG4 - Return to Opening Menu.
7.4.1 Clock Settings Screen
The top line of the Clock Settings Screen holds the current time and whether the clock is set for 12 or 24 hour
display. Note: The clock can also be accessed by pressing MUTE-F6-C on the keypad. This goes directly to
the clock setup screen shown at the right. This bypasses the PIN number entry (if enabled) and allows a user
who would normally have no access to the setup mode to access and update the clock.
PROG1 - Allows editing the minutes and hours.
PROG2 - Selects between AM and PM.
PROG3 - Selects between 12 and 24 hr time.
PROG4 - Saves the current settings and returns to the Opening Menu.
7.4.1.1 Clock Edit Screen
PROG1 - Go to Hours Settings Screen.
PROG3 - Go to Minutes Settings Screen.
PROG4 - Return to System Settings Screen.
7.4.1.1.1 Clock Hours Screen
PROG1 - Set Hours to 12.
PROG2 - Decrease Hours by 1.
PROG3 - Increase Hours by 1.
PROG4 - Return to Clock Settings Screen.
7.4.1.1.2 Clock Minutes Screen
PROG1 - Set Minutes to 0.
PROG2 - Decrease Minutes by 1.
PROG3 - Increase Minutes by 1.
PROG4 - Return to Clock Settings Screen.
TX Level 0dB
0dBm dwn u
p
back
PROG1 PROG2
PROG3
PROG4
System Settings
Clk Dum
p
next back
PROG1 PROG2
PROG3 PROG4
Clock 11:19AM 12hr
Edit A/P 12/24 back
PROG1 PROG2 PROG3 PROG4
Clock 11:19AM 12hr
Hours Mins back
PROG1 PROG2 PROG3 PROG4
Hours = 11
12 dwn u
p
back
PROG1 PROG2
PROG3
PROG4
M
ins = 19
0 dwn u
p
back
PROG1 PROG2
PROG3
PROG4