Filter
Top Products
Remote Control Console 15
7.1.4 Button Activated Setup Modes
|----------LN1-LN2 - Per Line Parameters Setup
| |----------Line Enable/Disable
| |----------Tone/Local Setting
| |----------Crossmute Enable/Disable
| |----------Squelch
| |----------TX Monitor Enable/Disable
| |----------AGC
| |----------TX Enable/Disable
| |----------Unselect Normal/Locked
| |----------DTMF ANI Decode Enable
|----------F1-F16 - Function Tone Parameter Screen
| |----------Function Tone Enable/Disable
| |----------Tone Programming Screen|
| |-----------Frequency Programming Screen
| | |-----------Duration Programming Screen
|----------SUP - Supervisor Function Enable/Disable
|----------MUTE - Mute Button Setup
| |----------Timed/Momentary
| |----------Timed Mute Duration Setup
| | |----------Incoming Select Call Setup
| | |----------Select Call Timer Setup
| |----------DTMF Rx Setup
|----------MON - Monitor Programming Screen
|----------Auto/Manual Selection
|----------Monitor Tone Selection
|----------Monitor Frequency
|----------Monitor Duration
|----------Monitor Level
7.2 Opening menu
The following buttons are active during this screen:
PROG1 - Pressing this button enters the Level Menu Screen.
PROG2 - Directs the display to the System Settings Screen.
PROG3 - Directs the display to the Alpha Settings Screen.
PROG4 - Exits the Setup Mode.
LN1-LN2 - Directs the display to the Line Tone/Local Screen.
F1-F8 - Function Tone Parameter Screen.
SUP - Enables supervisor mode.
MUTE - Set mute functionality.
ALERT - Directs the display to the Alert Cadence Programming Screen.
MON - Directs the display to the Monitor Programming Screen.
7.3 Level Menu Screen
When this screen is displayed the following buttons are active:
PROG1 - Direct display to Main Level Settings Screen.
PROG4 - Go back to Opening Menu.
Pressing any Line button - Displays the Line Level Setting Screen for that selected line.
Pressing any Mute button – Displays the PER line level of mute for that selected line.
PROGRAMMING MODE
LVLS SYS ALPHA EXIT
PROG1 PROG2
PROG3 PROG4
Select Line/Main
M
ain back
PROG1 PROG2 PROG3 PROG4