Filter
Top Products
16
Inter-Tel
®
Model 8664/8665/8668 User Guide
FINDING YOUR WAY
To use the desktop charger to charge the battery pack:
1. EITHER, Press (once or twice depending on the current display) to place
the endpoint in idle mode.
OR, Press and hold to power off the endpoint.
2. Place the endpoint into the desktop charger slot facing forward. If the endpoint
is placed correctly, the red indicator light will come on.
NOTE: The desktop charger’s indicator light will not come on if the charger is
empty, if it is not receiving power, or if the endpoint is seated incorrectly.
Charge Indicator
While the endpoint is charging in idle mode, it will display its extension number and
Charging…. The battery icon will show charging progress. The endpoint is fully
operational and will ring if called.
When the endpoint is charging while turned off, only Charging… will display and no
calls will be received. The dots will be racing during the charging cycle. It is normal
for the battery pack to become warm when charging.
Dual Charger
Overview
The dual charger is a two-slot desktop charger that comes in three models. Model
8664 is designed to charge the BPE100 battery pack in the Model 8664 endpoint and
a spare BPE100 battery pack; Model 8665 is designed to charge the BPX100 battery
pack in the Model 8665 endpoint and a spare BPX100 battery pack; Model 8668 is
designed to charge the BPN100 battery pack in the 8668 endpoint and a spare
BPN100 battery pack. The models are not interchangeable.
Dual Charger for Model 8664 Dual Charger for Model 8665