Filter
Top Products
86
Inter-Tel
®
Model 8664/8665/8668 User Guide
MOVING ON
Logging In and Out of ACD Hunt Groups
Agents can log in to and out of the ACD hunt group at any time. While logged in, the
agent receives calls through the ACD hunt group. When the agent is logged out, calls
to that ACD hunt group bypass the agent.
To log in to all of your ACD hunt groups at once using the ACD Agent Login/
Logout feature code:
1. While in idle mode, press to bring up the two-line display.
2. Dial and enter your Agent ID, if necessary. The display shows
AGENT LOGGED IN TO ALL ACDS, and you hear a confirmation tone.
NOTE: This feature code acts as a toggle. If you were already logged in, the display
shows AGENT LOGGED OUT OF ALL ACDS, and you hear a confirmation tone.
To log in to one or more hunt groups using the ACD Agent Login feature code:
1. While in idle mode, press to bring up the two-line display.
2. Dial . The display shows AGENT LOGIN ACD HG #.
3. EITHER, Enter the desired ACD hunt group number.
OR, Press to log in to all of your ACD hunt groups at once. The display
shows AGENT LOGIN AGENT ID.
NOTE: If you entered an invalid hunt group number, the display shows NOT AN
ACD HUNT GROUP, and you hear repeating tones.
4. Do one of the following:
• To log into one or more ACD hunt groups using Agent IDs: Enter your
Agent ID. The display shows AGENT LOGGED INTO ALL ACDS. You
are logged into
the ACD hunt group using Agent IDs.
• If another Agent ID is already logged in at this endpoint, you hear repeating
tones, and the display shows DIFFERENT AGENT ID ALREADY USED.
You must have the other agent log out before you can use that endpoint.
• To log into one or more ACD hunt groups not using Agent IDs: Press
. The display shows AGENT LOGGED INTO ALL ACDS. You are
logged into the ACD hunt group that does not use Agent IDs.
If you were already logged in, the display shows ALREADY LOGGED
INTO <hunt group>.
If you are not a member of the entered hunt group, the display shows NOT
AN AGENT IN THIS HUNT GROUP, and you hear repeating tones. Start
over.
5. Press to return to the two-line display. Repeat this procedure to log into
additional ACD groups, if necessary.
MENU
3 2
8
MENU
3 2 6
#
#