Filter
Top Products
Call Forwarding Services
MD Evolution – Cordless DT59070
Variable Call Forwarding
Defining a variable call forwarding on a case-by-case basis is
carried out within the framework of your extension's service
programming functions.
When your extension is idle :
¿ Dial the prefix that corresponds to the desired type of call
forward.
Usually, you will dial one of the following :
61 To activate an immediate call forwarding.
62 To activate a call forwarding on no-answer condition.
63 To activate a call forwarding on busy condition
69 To activate a call forwarding on no-answer condition and busy
condition.
64 To activate a do not disturb call forwarding.
For the first four cases :
¿ Then dial the internal or external number that will be the
recipient of your call forwards.
As previously indicated, the recipient's number may contain up to
18 digits, including the network access prefix. An external number
may be one that is accessible through abbreviated dialling.
Note : An external number is composed of the external
access prefix “0” followed by the actual external Directory
number.
# To Dial only in case of an external Directory number.
Needed to mark the end of an external Directory number.
For every case :
ÜÛ Press to confirm
Wait for the Service Acceptance Tone
ÚÙ Press to finish the procedure
Your extension returns to idle status.
The variable call forward that you have just defined is effective
immediately.