Filter
Top Products
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
Extra features 95
Which dialling method?
You can easily check whether tone or pulse dialling is required. Proceed as
follows:
1. Check if the base station is set to tone dialling, see “Tone dialling” on
page 95.
2. Press
YES.
You hear the dial tone.
3. Dial the number of someone you know.
If the external line supports tone dialling, you hear the phone ring.
If you dial the number and still hear the dial tone, you have to set the base sta-
tion to pulse dialling. See below.
Pulse dialling
1
To set the base station to pulse dialling:
Route:
BaseStation » Settings » Basic » PhoneLine
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
PhoneLine
and press YES.
The opposite of the current setting is displayed.
4. Scroll to either
GoToPulse
or
GoToDTMF
. If the display shows:
•
GoToDTMF
press NO because the base station is already set to pulse
dialling.
•
GoToPulse
press YES to set the base station to pulse dialling.
Tone dialling
To set the base station to tone dialling:
Route:
BaseStation » Settings » Basic » PhoneLine
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
PhoneLine
and press YES.
The opposite of the current setting is displayed.
4. Scroll to either
GoToDTMF
or
GoToPulse
. If the display shows:
•
GoToPulse
press NO because the base station is already set to tone
dialling.
•
GoToDTMF
press YES to set the base station to tone dialling.
1.
This function may not be supported by your telephone network operator.