Filter
Top Products
Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
Personalizing the base station 63
located again, the same service is called to deactivate the diverted telephone
number. Ask your dealer for more information on the call diversion service.
Priority phone can only be set for one handset. If a diversion telephone
number is activated, no calls may be received by the base station until the
priority phone handset is located again.
Setting a handset as priority phone
To set a handset as priority phone and to set the diverted telephone
number:
Route:
BaseStation » Settings » Advanced » PriorityNo » AssignNo
1. Select
Advanced
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
AssignNo
and press YES.
Dev.Number:
is displayed. If a priority phone handset has already been set,
this is shown in the display.
4. Enter the number of the handset you want to assign as priority phone.
5. Press
YES to confirm.
Either
Access Code:
or
Handset not known
is displayed. In the latter case, you
have entered a non-existent handset number. If an access code has been set
before, this is shown in the display.
6. If required, enter the access code for the call diversion service (
CLR =
delete;
UP = move left; DOWN = move right).
7. Press
YES to confirm.
Divert:
is displayed. If a divert code has been set before, this is shown in the
display.
8. Enter the numbers to be dialled after the access code, in order to activate a
diverted number (
CLR = delete; UP = move left; DOWN = move right).
9. Press
YES to confirm.
Either
Undo Divert:
or
Fill Divert Profile
is displayed. In the latter case, you have
not entered a code for call diversion. If an undo divert code has been set
before, this is shown in the display.
10. Enter the numbers to be dialled after the access code, in order to deactivate
a diverted number (
CLR = delete; UP = move left; DOWN = move right).
11. Press
YES to confirm.
Priority phone is now set or if
Fill undo Divert Prof.
is displayed, you have not
entered a code to deactivate call diversion.