Filter
Top Products
12
Location and Function of Parts and Controls
When the MIC ON/OFF button of the
delegate’s unit is pressed under the condition
where the PRIORITY button of the chairman’s
unit is held down, the MIC ON/OFF button
indicator and microphone indicator blink for
about 3 seconds to tell the user that the
microphone cannot be enabled.
9 REC OUT (recording output) connector
(minijack)
Connect to the input connector of the tape recorder
to record the monitor sound.
Note
Use a connecting cable with a terminating resistor
(RK-G64 and so on) to connect the unit to the
microphone input connector of a tape recorder.
Use a connecting cable without a terminating
register (RK-G69 and so on) to connect the unit to
the line input connector of a tape recorder.
!ºEarphone jacks (minijack)
Connect an earphone to monitor the signal from
the interpreter’s unit or the original signal.