Sony spp-n1025 Cordless Telephone User Manual


 
Getting Started
9
US
Getting Started
Prepare the battery pack
Charge the battery pack for more than 12 hours before you start using
your phone.
1 Slide open the battery
compartment lid of the handset.
2 Connect the battery connector
with correct polarity (black wire
goes on right side and red wire
goes on left).
3 Insert the battery pack, and
close the lid.
4 Place the handset on the base
phone.
The CHARGE lamp lights up
when the handset is properly
seated on the charge terminals
of the base phone. Charge the
battery pack for more than 12
hours so that the battery is fully
charged. The CHARGE lamp
remains lit even after charging
is completed.
Step 2
CHARGE lamp
BP-T18
Black
continued
Red