Filter
Top Products
33
US
Telephone Features
Telephone Features
LINE lamp
(HOLD)
Switching the phones during a call
When you put a call on hold, you can return to the call on the other
phone without disconnecting the call.
To switch from the base phone to the
handset
1 Press (HOLD) on the base
phone.
The LINE lamp on the base
phone flashes slowly.
2 Press (TALK) or pick up the
handset from the base phone.
“TALK” appears on the display.
The LINE lamp on the base
phone lights up.
3 When you are done talking,
press (OFF) or replace the
handset to the base phone.
The display and the LINE lamp
on the base phone go off.
Notes
• If you pick up the handset while talking through the speakerphone on the
base phone, the call will be switched to the handset.
• If you do not press (HOLD) in step 1, and press (TALK) in step 2, you can
make a three-way conversation (see “Having a three-way conference” on
page 37).
• When the call is put on hold on the base phone, if you pick up the handset,
the call will be switched to the handset.
continued
(TALK)
(OFF)