Sony spp-n1025 Cordless Telephone User Manual


 
24
US
Telephone Features
Note
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
You may press (ONE TOUCH) instead of doing steps 2 and 3.
The entered phone number (*) and (#) are displayed as “ ” and “
respectively in step 4.
You may press (SELECT) instead of pressing (PGM) in step 5.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 4 above, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (REDIAL/PAUSE).
Making calls with one-touch dialing
1 Press (TALK) and wait until “TALK” appears on the display.
2 Press (ONE TOUCH).
The phone number stored on the one-touch dialing button will
appear on the display and will be dialed.
Making Long Distance Calls with one-touch dialing
First of all, store the access number in “Storing phone number” above-
mentioned steps, then do as follows:
1 Perform steps 1 and 2 in “Making calls with one-touch dialing”
above.
2 Display “DIRECTORY” by pressing (SELECT).
3 Display the name and phone number you want to call (see page
27), then press (SELECT) or (TALK).
When you leave the Jog lever raised, or lowered, the names
and phone numbers on the display scroll fast.
To check the phone number before one-touch dialing
While the handset is not in use, press (ONE TOUCH).
The number stored on the button appears on the display for 20
seconds. To dial the number, press (TALK) while the number is
displayed.
One-touch dialing (continued)