Filter
Top Products
Answering Machine Features
56
US
Preparing the answering machine (continued)
Selecting the ring time
You can select the number of rings before the answering machine
starts to play back the greeting and records incoming messages. There
are 5 options of ring time. The ring time is preset to “TOLL SAVER”.
1 Press (PROGRAM).
2 Turn Jog Dial to choose “ANSWER
SETTINGS”, and then press Jog
Button (ENTER).
3 Turn Jog Dial to choose “RINGER
TIMES”, and then press Jog Button
(ENTER).
4 Turn Jog Dial to select a ring
duration, and then press Jog Button
(ENTER). (See the table for details.)
You hear a long confirmation beep.
Set “RINGER TIMES” to Mode
“TOLL SAVER” If new messages have been recorded, the phone
answers at the second ring and records incoming
messages; if no new messages are recorded, it
answers at the fifth ring. When you call from an
outside phone and hear three rings, you know that
there are no new messages. If you hang up at this
point before the phone answers, you can save the
toll for the call.
“1 TIME” to “4 TIMES” The phone always answers at the set ring times and
records incoming messages.
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
Tip
When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
Jog Button
(ENTER)
RINGER TIMES
GO BACK
1 TIME
2 TIMES
3 TIMES