Sony SPP-A2480 Cordless Telephone User Manual


 
Getting Started
21
US
Getting Started
5 Set the hour (1 to 12) by turning Jog Dial, and
then press Jog Button (ENTER).
6 Set the minute (00 to 59) by turning Jog Dial,
and then press Jog Button (ENTER).
7 Choose “AM” or “PM” by turning Jog Dial, and
then press Jog Button (ENTER).
You hear a long confirmation beep and the day
and time you just entered is announced. Then
the phone starts counting time.
Notes
Do not allow more than 60 seconds to elapse during the operation procedure.
“SUN 12:00AM” on the display of the base phone flashes when the day and
time is cleared due to a power interruption, or when you connect the base
phone to the AC outlet for the first time.
If the current day and time are not set, you will not hear a time stamp when
you play back recorded messages.
Tip
When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
ENTER AM/PM AND
PRESS JOG BUTTON
12:00AM
ENTER MINUTE AND
PRESS JOG BUTTON
12:00AM