Filter
Top Products
50
US
Caller ID Features
Storing a number of the Caller ID list into
the Phone Directory
1 Display the name and phone number you want
to store from the Caller ID list (see page 46).
2 Confirm the number and press (SELECT).
3 Make “PGM” flash using the Jog lever, then
press (SELECT).
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see page
25).
4 Press (SELECT).
The cursor flashes at the right of the phone
number.
Enter or change the phone number, if necessary
(see pages 25 and 26).
5 Press (SELECT) again.
You will hear a long confirmation beep and the
name and number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number (See page 51).
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
Using the Caller ID list (continued)
SMITH JOHN
DIAL PGM ERASE
SMITH JOHN
SMITH JOHN