Filter
Top Products
Basics
18
US
1 Pick up the handset from the
base unit.
2 Press (TALK) and wait until
“TALK” appears on the display.
You will then hear a dial tone.
The LINE lamp on the base unit
lights up.
If “NO CONNECT” appears on
the display, move closer to the
base unit.
3 Dial the phone number.
4 When you’re done talking, press
(OFF) or replace the handset on
the base unit.
The display and the LINE lamp
on the base unit go off.
Basics
Making calls
Additional tasks
(REDIAL/PAUSE)
(HOLD)
(CHANNEL)
(*TONE)
(FLASH)
To
Select a better channel
Adjust the handset volume
Put a call on hold
Switch to tone dialing temporarily
Switch to another call
(“call waiting” service*)
Turn on/off the ringer of the
handset
* You need to subscribe to the service from your telephone company.
Do this
Press (CHANNEL) .
Raise or lower the Jog lever to set the
handset volume.
Press (HOLD).
Press (HOLD) or (TALK) to resume the
conversation.
Press (*TONE) after you’re connected. “ ”
appears on the display.
The line will remain in tone dialing until
disconnected.
Press (FLASH).
Press (FLASH) again to return to the first
caller.
See page 28.