Filter
Top Products
25
US
Telephone Features
Telephone Features
4 Press (SELECT).
“ENTER NUMBER” appears.
5 Enter the phone number.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one
digit.
6 Press (PGM).
You will hear a long confirmation beep, and the name and
the number are stored. The display goes off.
Notes
• If you intend to save a 51st phone number, you will hear five short error
beeps and “MEMORY FULL” will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 26).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong name or number in step 3 or 5, lower the Jog
lever to erase it. Then enter the correct name or number.
• The entered phone number (*) and (#) are displayed as “ ” and “ ”
respectively in step 5.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 5 above, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (REDIAL/PAUSE).
Changing a stored name and/or phone number
1 Display the name and phone number you want to
change by doing steps 1 and 2 on page 27.
2 Press (SELECT).
continued
SONY
SONY
DIAL EDIT ERASE