Filter
Top Products
Answering Machine Features
Answering Machine Features
43
US
Picking up new messages
1 Call your telephone number from a touch-tone phone.
2 When you hear the greeting, press (#) and enter your
remote ID code (security code).
You will hear a long confirmation beep.
The number of new messages will be announced.
3 Press the keys in the “Table of control codes” (see page 44)
for the desired operation command.
4 When you are finished, disconnect the line.
Notes
• Do not let two seconds elapse between each digit of the remote ID code
(security code) and the control code.
• If you did not turn on the answering machine, your phone answers
automatically after 10 rings.
• If the message recording memory runs out, the answering machine turns off
automatically. “Memory full. Please enter your security code” is announced.
• If you enter wrong remote ID code (security code) three times, the line will be
disconnected.
• If no keys are pressed within 20 seconds, the line will be disconnected.
Tips
• Press (*)(0) on the touch-tone keypad or (PLAY/STOP) on the base unit to
disconnect the line.
• Cut off the Remote Control Card and carry it with you to see how to operate
from an outside phone.
continued