Filter
Top Products
58
US
Intercom Operation
Transferring a call (continued)
Transferring from the base phone to the cordless handset
Example: Transferring a call from the
base phone to the cordless
handset whose station number
is 1.
1 Press (INTERCOM).
The call is put on hold.
2 When the system has one cordless
handset
Skip this step.
When the system has an
additional cordless handset
Turn Jog Dial to choose “TO
HANDSET 1”, and then press Jog
Dial.
3 The base phone and cordless
handset ring and
“** INTERCOM 1 **” appears on
the display of the base phone and
“** INTERCOM 0 **” appears on
the display of the cordless handset.
4 Pick up the cordless handset from
the charger (When Quick talk is set
to “ON”; see page 40), or press
(TALK) or (INTERCOM) on the
cordless handset.
You can talk between the base phone
and the cordless handset.
5 To talk to the caller with the cordless
handset, replace the handset in the
cradle or press (SPEAKERPHONE) on
the base phone.
“TALK” appears on the display of
the cordless handset.
If no one answers the phone
Press (INTERCOM) again.
Tip
You can receive an intercom call on the cordless handset even when the ringer
volume is set to off. The phone will ring at a low level.
(SPEAKERPHONE)
(TALK)
(INTERCOM)