Filter
Top Products
Basics
32
US
1 Pick up the cordless handset
from the charger.
2 Press (TALK) and wait until
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
The dialing keys light up.
You then hear a dial tone.
“HANDSET 1 IN USE”
appears on the display of the
base phone when the cordless
handset with the station number
“1” is in use.
If you hear five short error
beeps and “NO
CONNECTION” appears on the
display, move closer to the base
phone.
3 Dial the phone number.
4 When you’re done talking, press
(OFF) or replace the cordless
handset on the charger.
The display turns off.
To make a call after checking the phone number
You can dial the phone number before pressing (TALK) or
(EZ ACCESS). If you make a mistake when dialing the phone number,
press (ERASE) to erase the number.
VOL switch
I (HEADSET)
jack
(*TONE)
(HOLD)
Basics
Making calls
(EZ ACCESS)
(ERASE)
(CALL WAITING/FLASH)
Making calls with the cordless handset