Filter
Top Products
55
US
Intercom Operation
Intercom Operation
Talking from the base phone to the cordless handset
Example: Making intercom call from the
base phone to the cordless
handset whose station number is
1.
1 Press (INTERCOM).
2 When the system has one cordless
handset
Skip this step.
When the system has an additional
cordless handset
Turn Jog Dial to choose “TO
HANDSET 1”, and then press Jog Dial.
3 The base phone and cordless handset
ring and “** INTERCOM 1 **”
appears on the display of the base
phone and “** INTERCOM 0 **”
appears on the display of the cordless
handset.
When a person at the cordless handset
picks up the cordless handset from the
charger (When Quick talk is set to
“ON”; see page 40), or presses (TALK)
or (INTERCOM), you can talk with each
other.
4 When you are done talking, replace the
handset in the cradle or press
(SPEAKERPHONE) on the base phone.
If no one answers the phone
Press (INTERCOM) again.
Notes
• If there is an incoming call during intercom conversation between the base
phone and the cordless handset, intercom call will be disconnected, and both
the base phone and the cordless handset will ring.
• While talking with an outside caller via the cordless handset, you cannot
make an intercom call. If you press (INTERCOM) on the cordless handset,
“NO CONNECTION” appears on the display and you will hear five short
error beeps.
Tip
You can receive an intercom call on the cordless handset even when the ringer
volume on the cordless handset is set to off. The phone will ring at a low level.
continued