Filter
Top Products
Settings and Adjustments
85
To adjust the volume of all the
speakers at one time
Use the amplifier’s (receiver’s) volume control.
xTEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the “BALANCE” and “LEVEL.”
1 Select “SPEAKER SETUP” in the Setup
Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3 From your listening position, select
“BALANCE” or “LEVEL” and adjust the
value of “BALANCE” using C/c and
“LEVEL” using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF” to
turn off the test tone.
Notes
• When you adjust the speaker settings, the sound cuts
off for a moment.
• The test tone signals are not output from the digital
jack.
OFF The test tone is not emitted from
the speakers.
ON
The test tone is emitted from each
speaker in sequence while
adjusting balance or level.
When you select one of the
“SPEAKER SETUP” items, the
test tone is emitted from both left
and right speakers simultaneously.
Adjusting the speaker volume and level