Filter
Top Products
30
•When “NO” or “LINE OUTPUT L/R (AUDIO)” is selected, Quick Setup is finished and
connections are complete.
•When “DIGITAL OUTPUT” or “DIGITAL & 5.1CH OUTPUT” is selected, the Setup
Display for “DOLBY DIGITAL” appears.
q; Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 23 to 26 (
through ).
qa Press ENTER.
“DTS” is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 23 to 26 (
through ).
qd Press ENTER.
•When “DIGITAL OUTPUT” is selected in Step 9, Quick Setup is finished. All
connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG”
(page 80).
•When “DIGITAL & 5.1CH OUTPUT” is selected in Step 9, the Setup Display for
“SPEAKER SETUP” appears.
Audio Cord Connection Type You select Page
D-PCM 80
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby
Digital decoder)
80
Audio Cord Connection Type You select Page
D-PCM 80
DTS (only if the amplifier
(receiver) has a DTS decoder)
80
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
C-2 D-2
B-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
B
D
C-2 D-2
B-2