Filter
Top Products
32
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 23 to 26
( through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 74 for using the Setup Display.
Audio Connection (pages 23 to 26)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 79).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 80)
.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 79).
Enjoying the surround sound effects
Item You select Page
DISTANCE
BALANCE
LEVEL
Set according to the connected
speakers
82
Item You select Page
DOWNMIX DOLBY SURROUND 79
DIGITAL OUT ON 79
Item You select Page
DOWNMIX DOLBY SURROUND 79
B D
A
B-1
B-2 C-2 D-2
C-1
D-1