Filter
Top Products
Settings and Adjustments
79
xTRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, MPEG audio, DTS, or
Dolby Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 75).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
player selects PCM, DTS, Dolby Digital, and MPEG
audio sound tracks in this order.
xCD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs.
This setting will be activated when you open/
close the disc tray.
This function affects the output of the
following jacks.
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
Note
If you select “ON” when playing CD type DTS discs,
the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the
sound according to the playback and
connection conditions.
Select “AUDIO SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 74).
The default settings are underlined.
xAUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
x
AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the “AUDIO DRC” function. This affects the
output from the following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
— DIGITAL OUT (OPTICAL or
COAXIAL) jack only when “DOLBY
DIGITAL” is set to “D-PCM” (page 80).
OFF No priority given.
AUTO Priority given.
OFF
Select this when playing CD discs,
including CD type DTS discs.
ON
Eliminates the use of unnecessary
circuits needed to play CDs.
OFF Turns off the audio attenuation.
Normally, select this position.
ON Reduces the audio output level so that
no sound distortion occurs.
Select this when the playback sound
from the speakers is distorted.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL:
MPEG:
D-PCM
PCM
DTS:
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
continued