Filter
Top Products
Adjusting Flash Length
Additional Information
71
Your telephone is factory-set to have a flash
length of 700 milliseconds, which is appropriate
for most environments. However, if your instal-
lation requires a longer or shorter flash length,
you may change the length to 100 milliseconds,
300 milliseconds, or 1 second.
1 Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until “Advanced Setting”
appears in the display, and then press
ENTER.
3 Press the soft key under NEXT
repeatedly, until “Flash Length”
appears in the display, and then press
ENTER.
The display will show the currently set
flash length.
4 Press the soft key under CHANGE
repeatedly, until the desired flash
length is displayed.
The choices are:
Length:100ms (100 milliseconds)
Length:300ms
Length:700ms (factory setting)
Length:1 second
5 Press PROGRAM to exit.
SBC-4000 UG for PDF v4 040702.qxd 4/7/02 4:01 PM Page 81