Filter
Top Products
Adjusting Auto Hold Drop Time
Additional Information
1 Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until ”Advanced Setting”
appears in the display, and then
press ENTER.
3 Press the soft key under NEXT
repeatedly, until “Hold Drop Time”
appears in the display, and then
press ENTER.
The display will show the currently
set hold drop time.
4 Press the soft key under CHANGE
repeatedly, until the desired hold
drop time is displayed.
The choices are:
Hold Drop: 5 MIN (5 Minutes)
Hold Drop:15 MIN
Hold Drop:30 MIN (factory setting)
5 Press PROGRAM to exit.
Your telephone is factory-set to automatically
drop a call if it is on hold for more than 30 min-
utes. This feature is designed to prevent calls
from accidentally being placed on hold indefi-
nitely. If you would prefer a different length of
time, you may change the setting 5 minutes or
15 minutes instead.
70
SBC-4000 UG for PDF v4 040702.qxd 4/7/02 4:01 PM Page 80