Filter
Top Products
25
Headset connection (Headset not included)
For hands free conversation, connect the
headset (not included) to the HEADSET jack.
The handset earpiece and microphone are
disabled when the headset is connected.
Press TALK/CALL BACK to answer or place a
call while using the headset.
Belt clip installation
• Attach the belt clip by inserting the sides of
the belt clip into the slots.
• Snap the ends of the belt clip into place.
HEADSET JACK AND BELT CLIP
The charge/in use & incoming call/in use indicator will change under the
following conditions.
CHARGE/IN USE LED on the base
INCOMING CALL/IN USE LED on the handset
Talking Lit steadily
Paging Flashes every 1 second
Low battery Flashes every 15 seconds
Incoming call Flashes in same pattern as telephone ring
LIGHT SIGNALS
Talking Lit steadily
Charging Lit steadily
Incoming call Flashes in same pattern as telephone ring
Paging Flashes every 0.5 second
Voice mail Flashes every 1 second
Belt clip
slot