Sanyo CLT-J30 Cordless Telephone User Manual


 
22
Reviewing and deleting directory contents
1. Make sure the phone is OFF (not in TALK mode).
2. Press MEM.
3. Use CID/VOL
or to scroll through the directory until the
desired name/ number is shown, or use the number pad to select a
memory location. The selected telephone number and name show on
screen.
4. While the entry is displayed, press CH/DEL to delete the entry. The
screen shows “DELETE?”
5. Press CH/DEL again to delete the entry. “DELETED” shows on
screen.
Chain dialing from the directory
Use this feature to make calls that require a sequence of numbers such as
using a calling card for a frequently called long distance number. You can
dial each part of the sequence from a different entry of the directory. The
following example shows how you can use chain dialing to make a call
through a long distance service:
The Number for: Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
DIRECTORY
1. Make sure the phone is in TALK mode.
2. Press MEM and then press 7.
3. When you hear the access tone, press MEM and then press 8.
4. At the next access tone, press MEM and then 9.
Tip: Wait for the access tones before pressing the next memory key,
or your call might not go through.