Filter
Top Products
6
INSTALLING THE SPEAKERPHONE
To make full use of the Speakerphone’s
features, you must connect it to two tele-
phone lines, each with its own telephone
number. However, you can connect it to
a single line.
Notes:
• The first Speakerphone you connect
to the phone line is automatically set
to Extension 11. Any additional
Speakerphones you connect to the
phone line will ring until you set its
extension number (see “Setting the
Station Extension Numbers” on
Page 12).
• You must connect the Speaker-
phone to the telephone lines before
you plug in its AC adapter. Other-
wise, each station will have the
same extension number and the
paging and intercom features will
not work until you properly set all ex-
tensions (see “Setting the Station
Extension Numbers” on Page 12).
• You can connect your Speaker-
phone directly to a single 2-line
modular phone jack.
• If you do not have 2-line phone
jacks, you can use 1-line modular
phone jacks or combine two 1-line
modular phone jacks using a 2-line
coupler (such as RadioShack Cat.
No. 279-401, not supplied).
• If your phone line jacks are not mod-
ular jacks, you can update the wiring
yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can have the phone
company update the wiring for you.
• The USOC number of the jack to be
installed is RJ14C (for a 2-line
phone jack) or RJ11C (for a 1-line
phone jack).
43-463.fm Page 6 Friday, August 13, 1999 9:06 AM