Filter
Top Products
10
4. Insert the supplied AC adapter’s
barrel plug into the POWER jack on
the bottom of the telephone, then
route the AC power cord through the
AC ADAPTER CORD slot.
Do not plug the adapter into the AC
outlet at this time
.
Caution: The supplied AC adapter
supplies 12V DC, delivers at least
300 mA, and has a plug that proper-
ly fits the telephone’s POWER
jack.
Using an adapter that does not meet
these specifications might damage
the telephone or the adapter.
5. Plug the modular cord’s other end
into the modular phone line jack(s)
for Line 1 and Line 2, then plug the
AC adapter into a standard AC out-
let.
To silence the phone ringing, set the
station extension number for the
phone (see “Setting the Station Ex-
tension Numbers” on Page 12).
6. Align the keyhole slots on the back
of the stand with the wall plate studs
or the screws in the wall, then care-
fully slide the phone down to secure
it.
7. Lift out the handset holder, rotate it
180°, then snap it back into place so
it holds the handset.
43-463.fm Page 10 Friday, August 13, 1999 9:06 AM