Filter
Top Products
16
USING AUTO REDIAL
Follow these steps to set your Speaker-
phone to automatically redial a number
(one that is busy, for example) up to ten
times.
1. While the handset is on the cradle
and SPKR PHONE is off, press an
available line’s button. The line lock
indicator flashes and SPKR PHONE
lights.
2. Press
REDIAL
. PRIVACY lights and
SPKR PHONE and the line lock in-
dicators flash.
The Speakerphone redials the num-
ber up to ten times, every 30 sec-
onds.
3. When the person answers, pick up
the handset or press
SPKR PHONE
.
This cancels auto redial.
To cancel auto redial while the phone is
redialing, press
REDIAL
, the line button,
PRIVACY
, or
SPKR PHONE
, or lift the
handset.
Note:
Be sure to cancel auto redial be-
fore you leave the area of your tele-
phone. Otherwise, your Speakerphone
will continue to hang up and redial at 30
second intervals, even if someone an-
swers.
CONFERENCE CALLING
Conference calling lets you conduct 3-
way conversations with two outside call-
ers, or with one outside caller and one
other internal station.
With Two Outside Callers
1. Place the first call on hold by press-
ing
HOLD
.
2. Place or answer a call on the other
line.
3. When the second call answers,
press
CONFERENCE
. All three par-
ties are connected.
To end the conference call, simply hang
up.
To disconnect one of the callers from
the conference call, simply press the line
button for the caller you want to have
stay on the line.
To end the conference call and talk to
both callers individually, press
HOLD
.
This ends the conference call and puts
both calls on hold (see “Using Hold” on
Page 14).
To start the conference call again, while
both calls are on hold, press one of the
line buttons, then press
CONFERENCE
.
43-463.fm Page 16 Friday, August 13, 1999 9:06 AM