Filter
Top Products
9
Mounting Directly on the Wall
Using a drill (not supplied) and the sup-
plied screws and spacers, you can
easily mount your ET-908 directly on
the wall.
1. At the desired mounting location,
drill two holes 3
15
/
16
inches apart,
one above the other.
2. Place a spacer over each screw,
then thread a screw into each wall
hole until the screw’s head
extends about
1
/
4
inch from the
wall.
3. Press the ET-908’s AC cord under
the recessed clip directly below it
on the bottom of the phone.
4. Plug one end of the supplied 7-
foot modular cord into the
TO TEL
LINE
jack, then press the cord
under the other recessed clip on
the bottom of the phone.
5. Insert the tabs on the supplied
mounting bracket into the slots on
the bottom of the base, then press
the bracket down until it snaps
into place.
3
15
/
16
”
TO TEL. LINE
43-1083.fm Page 9 Tuesday, August 17, 1999 2:17 PM