Filter
Top Products
6
INSTALLATION
SELECTING A
LOCATION
You can set the ET-908’s base on a
flat surface (such as a desktop or
counter-top), mount it on a modular
jack wall plate, or mount it directly on
the wall. The base’s location affects
the phone’s range. If you have a
choice of several locations, try each to
see which one provides the best per-
formance.
Select a location that is:
• Near an AC outlet
• Near a telephone line jack
• Away from electrical machinery,
electrical appliances, and metal
walls or filing cabinets
• Away from wireless intercoms,
alarms, and room monitors
If the phone line jack is not a modular
jack, you must update the wiring. You
can convert the wiring yourself, using
jacks and adapters available at your lo-
cal Radio Shack store. Or, you can let
the phone company update the wiring
for you.
Notes:
• The phone company charges for
the installation of the necessary
jacks.
• The USOC number of the base-
board jack to be installed is
RJ11C.
• After you mount the phone, you
must install the battery pack and
charge it for 24 hours before you
use it the first time. See “Prepara-
tion” on Page 11.
PLACING THE BASE ON
A DESKTOP
1. Plug one end of the supplied 7-
foot modular cord into the
TO TEL
LINE
jack on the back of the ET-
908’s base.
2. Plug the modular cord’s other end
into a modular phone line jack.
3. Plug the ET-908’s AC cord into a
standard AC outlet. The POWER
indicator turns on.
4. For the best reception, adjust the
base’s antenna so it stands
straight up.
TO TEL. LINE
1
2
3
4
43-1083.fm Page 6 Tuesday, August 17, 1999 2:17 PM