Filter
Top Products
11
PREPARATION
INSTALLING THE
BATTERY PACK
To install the supplied rechargeable
battery pack, place it on the battery
compartment tracks, then slide it up
(toward the antenna) until it locks in
place.
Note
: You must charge a new battery
pack at least 24 hours before you use
it the first time.
When the handset’s battery pack no
longer recharges, replace the battery
pack. You can order a replacement
battery pack from your local Radio
Shack store.
To remove the battery pack, press the
tab on the back of the handset, slide
the battery pack down (away from the
antenna) until it stops, then lift it up to
remove it.
Note:
The phone uses one recharge-
able nickel-cadmium battery pack. At
the end of the battery’s useful life, it
must be recycled or disposed of prop-
erly. Contact your local, county, or
state hazardous waste management
authorities for information on recycling
or disposal programs in your area.
Some options that might be available
are: municipal curbside collection,
drop-off boxes at retailers, recycling
collection centers, and mailback pro-
grams.
CHARGING THE
BATTERY PACK
You must charge the battery pack at
least 24 hours before you use the ET-
908 the first time or when you replace
the battery. To charge or recharge the
battery, simply place the handset on
the base. The CHARGE indicator
lights.
CORDLESS • SPEAKERPHONE ET-908
CHARGE
IN USE
PAGE
POWER
PAGE
CHARGE
Indicator
43-1083.fm Page 11 Tuesday, August 17, 1999 2:17 PM