Filter
Top Products
The Integrated Answering Device
28
4. You may continue to listen to the Voice
Prompts, or you may select a command from
the following chart. Ô
*For Memo Record and Greeting Message Record
function, the first time you enter the corresponding
command, it starts the Recording function. If you
want to stop the recording, enter the command
again.
5. After all of the Voice Prompts have played, you
hear intermittent beeps indicating that the
system is in the command waiting mode. You
may enter another command at this time from
the chart.
6. When you are finished, hang up to exit the
system. The answering system automatically
returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering
system, you can turn it on remotely from any touch-
tone telephone.
1. Call your telephone number.
2. Wait ten rings until the system answers. You
hear intermittent beeps.
Command Function
0 and 1 Repeat a Message
0 and 2 Playing Incoming Messages
0 and 3 Skipping a Message
0 and 4 Deleting a Message
0 and 5 Stop Operation
0 and 6 Answering System On
0 and 7 Memo Record/Stop*
0 and 8 Greeting Message Record/Stop*
0 and 9 Answer System Off
1 and 0 Voice Prompts
Ô NOTE Ô
Once you enter the remote
access menu, you must
enter a command within 15
seconds, or the answering
system automatically hangs
up and returns to standby.
43-3856.FM Page 28 Saturday, February 28, 2004 6:45 PM