Filter
Top Products
The Integrated Answering Device
19
2. Press
/VOL/SEL or /VOL/SEL until the
desired ring time appears.
3. Press
SET to select the new ring time. You hear
a confirmation tone. Then the announcement
“Ring time” and the new ring time is
announced. After a few seconds, the system
announces “To set record time, press menu
again”.
Selecting the Message Record Time
You have three record time options. The options
“one minute” or “four minutes” set the duration for
recording the incoming messages. “
Announce only”
answers the call with the preset greeting or your
personal greeting but prevents the caller from
leaving a message.
1. Press MENU/CLOCK four times in standby
mode.
You hear “Record time” and the current
recording time ([ ] one minute, [ ] four
minutes, [ ] Announce only, No recording),
and it is displayed on the base. Then you hear
the guidance for setting the record time.
2. Press
/VOL/SEL or /VOL/SEL until the
desired time appears.
3. Press
SET to select the new recording time.
You hear a confirmation tone. Then the
announcement “Record time” and new
recording time is announced. After a few
seconds, the system announces “To set
message alert, press menu again”.
43-3856.FM Page 19 Saturday, February 28, 2004 6:45 PM