Filter
Top Products
User Guide Polycom CX400 Cordless Phone
1 - 10
be the device for the Sounds setup page. Otherwise ensure that your
PC sound output device is selected.
d Check Finish to exit the wizard.
Usage Guidelines
To navigate through menus, to enter data, and instructions on how to use
Microsoft Office Communicator 2007, refer to the Microsoft Office
Communicator 2007 help and documentation.
Docking Cradle and Handset LED Indicators
The Polycom CX400 cordless phone cradle has two LEDs that provide
information about battery charging and connection status. The handset has an
LED that indicates the state of the handset. The various states and
interpretations are described in the following table.
Note
Contact your system administrator to ensure your account is configured in
Enterprise Voice mode.
LED State Description
Cradle Red Charging
LED
Off The handset is fully charged or cradle is not
receiving power.
On The handset is charging.
Cradle Green
Connection LED
Off The cradle is not receiving power (USB cord
may be unplugged or the computer may be
turned off).
On The cradle is powered and radio frequency
link is established with handset.
Slow
Flashing
There is no radio frequency link between
handset and cradle (the handset may be
off).
Fast
Flashing
The cradle is attempting to “pair” with the
handset (the handset may be off).
Handset Status LED Off The handset is off whether it is in the cradle
or not.
Green The handset is on whether it is in the cradle
or not.
Flashing
Red
The handset battery is low (when handset is
out of cradle).