Filter
Top Products
User Guide Polycom CX400 Cordless Phone
1 - 6
The handset and cradle are paired at the factory. If you find that you need to
re-pair the handset and the cradle, follow the instructions in this section.
To determine if your handset is already paired:
1. Press and hold Power On key for at least three seconds until the display
appears.
2. If the right-hand green LED on the front of the cradle is steady green, the
handset is paired with the USB cradle and you may proceed directly to
the next section, Connecting the Optional Headset.
3. If the right-hand green LED on the front of the cradle is flashing green,
continue with the steps in this section.
To pair the Polycom CX400 handset and cradle:
1. Press and hold Power On key for at least three seconds until the display
appears.
Skip this step if it was performed as mentioned above.
2. Press and hold Microphone Mute key for at least three seconds.
3. Press Pairing key on cradle.
When the handset and cradle are paired, the cradle is connected to a
personal computer running Microsoft Office Communicator 2007, and
Power On
Microphone
Mute
PAIR