Filter
Top Products
SpectraLink Corporation Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-K.doc Page 25
Display Contrast The display may need to be adjusted for different lighting
situations. Contrast may be set by pressing the Up and Down side buttons until the
desired contrast is displayed and then pressing the OK softkey.
Keypad Autolock The handset may be set to lock the keypad automatically when in
standby mode. The automatic locking function of the keypad may be disabled (the
default) or adjusted for a 5, 10 or 20 second delay before locking.
System Info
Phone IP Addr
Displays the IP address currently assigned to the handset.
Gateway IP Addr Displays the IP address currently assigned to the NetLink
Telephony Gateway.
Firmware Version Displays the software version running the handset. The MAC
address is the hardware identification number and is set at the factory. Three code
numbers correspond to the three files that each version uses.
(MAC address)
(downloader code) (functional code)
(phintl file)
OK Up
Downloader: pd11gl3.bin
Functional: pd11spc3.bin
Phintl: phintl24.bin
Extension Displays the extension currently assigned to the handset. This number is
for display purposes only; entering it does not assign the extension in the host
telephone system.
Push-to-talk The NetLink i640 Wireless Telephone incorporates push-to-talk
functionality. PTT may be allowed or disallowed in the Admin menu. If allowed, the
user may enable or disable locally, and may set the channel, tone volume and audio
volume. The menu for push-to-talk does not appear if PTT is disallowed on the
Admin menu or if no channel is enabled on the Admin menu.
Channel
Enable/Disable
Audio Volume
Tone V olume
OK Up