Filter
Top Products
PLANET VIP-152T User’s Manual
35
2. -idtime: set the duration(in second) of two pressed digits in dial mode as timed out. If after the
duration user hasn’t pressed next number, VIP-152T will dial out all number pressed.
3. -keypad: set DTMF type .User can select DTMF type VIP-152T receive and
transmit.(sysconf –keypad 0/1 , 0 for in band ,1 for RFC2833.)
4. -2833type: change RFC2833 Payload type.
5. -eod: select end of dialing key, e.g. set end of dial key as “ ” button , after finished pressing dialing
number then press “ ” will dial out. (sysconf –eod 0/1/2 , 0 for no end of dial key , 1 for “ ” button,
2 for “#” button )
usr/config$ sysconf
System information and configuration
Usage:
sysconf [-idtime digit] [-keypad dtmf]
[-2833type type] [-eod digit]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-service Specify lanphone service type. (0: Normal service,
1: HotLine service.)
-keypad Select DTMF type: 0=In-band,
1=RFC2833.
-2833type RFC2833 Payload Type (range:96~128 inter-used:100,102~105)
-eod End of Dial Digit setting(0: NONE, 1: *, 2: #)
-privacy Privacy Number Type(0: NONE, 1: Japan)
Example:
sysconf -keypad 0 -eod 2
usr/config$
4.13. [sip] command
1. –print: display all current configurations.
2. –mode: enable VIP-152T in SIP Proxy or Peer-to-Peer Mode.
Usage: sip –mode 0/1(1 for Proxy mode, 0 for Peer-to-Peer mode)
3. –px: set proxy server IP address or URL address (sip –px “IP address or URL of Proxy server”).
4. –pxport: set listening port of Proxy server.
5. –outpx: set IP address of outbound proxy server. After user set outbound proxy, all packets form
VIP-152T will be sent to outbound proxy server.
6. –prefix: set prefix string. If user ID contains alphabets, user can set it as prefix string here. For
example, if Account Name is 123, VIP-152T will sent out messages as Account Name @”IP address
of Proxy”, if user set prefix as abc, VIP-152T will set out as abc123@”IP address of Proxy”. This