Filter
Top Products
PLANET VIP-152T User’s Manual
12
Peer-to-Peer mode or Proxy mode (doesn’t support endpoint behind NAT function),
on IP sharing must enable “DMZ” function or set “Virtual Server” to open ports
(UDP port: 5060 and 16384, 16385). VIP-152T must enable this IP sharing
function.
User must enter public IP address of IP sharing.
9. Exit: Return to upper level of LCD Menu
6. Advanced Set (can be protected by password)
z Password:
User must key in password to enter this menu if password has been set, items under this
command are all important ones, which can only be configured by advanced users. If
password hasn’t been set, user can enter this menu directly without entering password.
"
Note:
1. If user forget password, please contact with your distributor, we will generate a specific
password according to your MAC address of VIP-152T.
2. User can also try to configure VIP-152T via Telnet or Web browser with default IP
address: 192.168.0.1. (If IP haven’t been changed)
z SIP
Mode
Select SIP connection mode to be peer-to-peer mode or Proxy mode.
Proxy
Proxy
Set Proxy IP address or Domain Name.
Outbound
Set Outbound Proxy IP address or Domain Name.
Px port
Set Proxy port for VIP-152T to send messages.
Expire (in seconds)
Set expire time of registration, in the duration of 2/3 expire time, VIP-152T will
re-register to Proxy Server again.
Exit
Return to upper level of LCD Menu