Filter
Top Products
PLANET VIP-152T User’s Manual
19
2. SIP Information
- Run Mode: Select VIP-152T to work under Peer-to-Peer mode or Proxy mode.
- Proxy IP Address: Set Proxy IP Address or URL address (Domain Name Server must be
configured. Please refer to Network Interface).
- Outbound Proxy: Set IP Address or URL address (Domain Name Server must be configured.
Please refer to Network Configure) of outbound Proxy server.
- Proxy port: Set Proxy port for VIP-152T to send message, default value is 5060, if there is no
special request of Proxy server, please don’t change this value.
- Phone Book Search: enable/disable phone book search function. If user enabled this function,
VIP-152T will search dialed number in phone book to see if there is any matched table before send
to Proxy server, and if there is a matched data in phone book, VIP-152T will make call to related IP
address.
- Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix string here.
For example, if Account Name is 123, VIP-152T will sent out messages as Account Name @”IP
address of Proxy”, if user set prefix as abc, VIP-152T will set out as abc123@”IP address of Proxy”.
This function is for special proxy server.
- Line Number: identify one number for the VIP-152T to register to the Proxy.
- Line Account: set user name of VIP-152T for registering. User can set user name and password
for registering. If password is no need, please set user name the same as line number or VIP-152T
won’t register successfully.
- Line Password: set password for registering.
- SIP Port: set SIP UDP port.