Filter
Top Products
PLANET VIP-110/VIP-210 Web Configuration Guide
- 5 -
Reset Button
There is a push button located behind a small hole next to the PWR LED. This button allows you
to reset VIP or force VIP to enter firmware upgrade mode.
Reset
Push a small, stiff object into the hole until the SYSTEM LED stops blinking, then release the
button.
Force firmware download mode:
Powering on the gateway while pressing down the button for 5 seconds forces VIP to enter
download mode
Port Label Function
RJ-45 LAN Connecting VIP to a 10/100 Mbps Ethernet network
RJ-45 WAN Connecting VIP to a 10/100 Mbps Ethernet net
work /
xDSL /Cable modem for Internet access
RJ-11 Telephony
Connect PBX Extension line/Telephone to VIP for
voice communication