Filter
Top Products
PLANET VIP-110/VIP-210 Web Configuration Guide
- 8 -
CLI configuration access
:
• You can connect the VIP-110/VIP-210 via telnet terminal program
• Start up your terminal program, here, we use Hyper Terminal as the example.
• Set up the parameters as below for Telnet connection
Host Address: 192.168.0.1
Port Number: 23
Connect Using: TCP/IP (WinSock)
• When connected, you’ll be asked to insert the username/password for machine admini-
stration, please enter “admin/123” for authentication. After logging in, the terminal will
prompt “ITG>” to indicate your machine is now ready for operation.
ë
Note
Please locate your PC in the same network segment
(192.168.0.x) of VIP-110/VIP-210. If you’re
not familiar
with TCP/IP, please refer to related chapter on user’s
manual CD or consult your network administrator for proper
network configurations.