Filter
Top Products
7
Charging and
Operating
Times
Charging time to full capacity (discharged battery): 8 hours
for handset, approx. 24 hours for spare battery in the charger.
During charging, the handset is fully functional.
Talk time: approx. 8 hours (with fully charged battery)
Standby time: approx. 80 hours (with fully charged battery)
Charge Display The charge status of the battery is shown by the A icon in the
display. This indicates:
A Battery fully charged
A Battery half charged
a Battery almost empty – left-hand segment flashes
A Battery empty
A Charge status is being determined –
border flashes (e.g. after battery change)
When the handset is in the charger, the flashing segments indi-
cate the charging process.
Charge
Warning
When the capacity of the battery is almost empty, you will
receive a warning. If you are not in a conversation, a short
“beep“ sound is produced by the buzzer every minute. During
a conversation, you will hear three short “beep” signals every
minute. You then have approx. five minutes talking time left.
If the battery is nearly empty when you power on the handset,
the display may switch on and off directly after that.
Initial Setup and Operation
Handset
Registration
Your handset can be operated with a maximum of 10 different
DECT systems. For this to happen, it must be registered with
each DECT system respectively.
Register your handset with a DECT system as described on
page 23.