Filter
Top Products
Appendix 29
EN
• wear and tear from normal daily use of the equipment
and its accessories
• damage due to insufficient or bad packaging of equip-
ment when returned to SAGEM
• supply of new versions of software
• work on any equipment or software modified or added
without the prior written consent of SAGEM
• malfunctions not resulting from the Equipment or from
software installed in user workstations for the purpose of
use of the equipment
• communication problems related to an unsuitable envi-
ronment, including:
- problems related to access and/or connection to the In-
ternet such as interruptions by access networks or malfunc-
tion of the line used by the subscriber or his correspondent
- transmission faults (for example poor geographical cover-
age by radio transmitters, interference or poor line quality)
- the local network fault (wiring, servers, workstations) or
the failure of the transmission network
• the normal servicing (as defined in the user guide sup-
plied with the equipment) as well as malfunctioning due to
servicing not being carried out, servicing costs are in any
event always borne by the customer.
C In the cases set forth in § B as well as after expiry of the
twelve month guarantee period, the customer must ask
SAGEM for an estimate, and he/she must accept the esti-
mate and agree to pay the charges mentioned in it before
returning the equipment to SAGEM. The repair and de-
livery costs will be invoiced to the customer.
The foregoing shall apply unless otherwise agreed in writ-
ing with the customer and only for the UK. If any provi-
sion of this guarantee shall be held to be in whole or in part
invalid or illegal due to an obligatory rule applicable to
consumers pursuant to their national legislation, such in-
validity or illegality shall not impair or affect the remaining
provisions or parts of this guarantee.
The CE symbol confirms conformity with the EU direc-
tives that apply to the device.
Declaration of Conformity (DoC)
Hereby, Sagem Communication Austria GmbH
declares that this PPF¦631, PPF¦632 is in compliance
with the essential requirements and other relevant provi-
sions of Directive 1999/5/EC.
WWW
You can find the complete Declaration of Conformity on
our website www.sagem-ca.at/doc
Energy Star 2007
Energy Star
As a participant in the ENERGY STAR programme, Sagem
Communication Austria GmbH has made sure that this
machine complies with the ENERGY STAR requirements.
Environment
Environment: Respect of environment is a key objective
of Sagem. Sagem uses environmentally friendly processes
to run its operations and has chosen to integrate strong en-
vironmental constraints in the full lifecycle of its products
including manufacturing, product use and end of life.
Recycling
Packaging: To facilitate packaging recycling, please con-
form to your local selective recycling rules.
Batteries: Old batteries have to be deposited in designat-
ed collection areas.
WEEE
Product: The crossed out dustbin logo on your product
signifies it is classified as Electrical and Electronic Equip-
ment covered by special disposal regulations.
To enforce recycling, recovery of The Waste Electrical and
Electronic Equipment (WEEE) and to protect the envi-
ronment and human health, European regulations requires
that you selectively collect waste equipment using one of
the following options:
• Your retailer will take your equipment back if you are
buying a replacement product.
• Waste equipment can also be deposited in designated col-
lection areas.
This user manual was printed on recycled paper bleached
without chlorine. This satisfies the highest standards for
low environmental impact. The cardboard packaging used
and the packaging inserts of paper and cardboard can be
disposed of as waste paper. The plastic foil may be submit-
ted for recycling or disposed of with waste not intended for
recycling, depending on the requirements in your country.