Filter
Top Products
Using the telephone
18
Answering a call from the base station (6326 and Voice
6626)
The handsfree speakerphone allows calls to be made or accepted without using a
handset .
An incoming call is received. The green light starts flashing.
To answer the call, press the key of the base station.
The loudspeaker and the microphone of the base station are switched on
automatically. Speak in the direction of the microphone.
You can adjust the loudspeaker volume with the (increase) or (decrease)
keys.
To hang up, press the key again.
The green light stops flashing.
Adjusting handset or base station volume during a call
1) From handset:
There are two volume levels: "Normal" and "High".
During a call, you can increase the earpiece volume by pressing the handset key
once.
When the call is over, the volume goes back to "Normal" level (default setting).
You can also adjust the initial "Normal" volume (default setting), (see “1.1 Earpiece
volume”, page 38).
2) From base station:
During a call or listening to messages, you can adjust the loudspeaker volume by
pressing the (increase) or (decrease) key.
Each time you press one of these keys, you select one of three available volume
levels (low, medium, high).
Switching on loudspeakers from the handset
To switch on the handset loudspeaker during a conversation, press the
key. To switch it off, press the key again.
To switch on the base station loudspeaker during a conversation, press the
handset key for 2 seconds. To switch it off, press the key again for 2
seconds.
The loudspeaker and the microphone on the base station are switched on so that
several people can participate in the conversation.
prelim-zenia.book Page 18 Mardi, 20. juin 2000 10:31 10