Filter
Top Products
Intercom
42
Answering Intercom Calls
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly. The display shows the calling extension.
• If the Auto Talk feature is turned on (p. 16), you can also answer a page by simply
lifting the handset off the base unit or charger.
When the base unit is being paged, it rings.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [
d
] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 47) and “ ” will flash rapidly on the base unit.
To answer the call, press [OFF], then [C] or [s].
1 Press [C], [s] or [HOLD/INTERCOM].
• You can also answer a call by pressing any button
except [
d
], [
B
] or [OFF].
2 To disconnect the intercom, press [OFF].
1 Press LOCATOR/INTERCOM [ ] or [].
2 To disconnect the intercom, press LOCATOR/INTERCOM [ ] or [].
• When the ringer volume is turned off (p. 17), the handset will ring at the low
level for intercom calls.
• You cannot change the ringer tone for intercom calls.
LINE IN USE
Handset
Ex. Handset 2 calling
Ex. Base calling
Call from Base
Call from HS[2]
Base Unit