Filter
Top Products
Preparation
For assistance, please call: 1-800-211-PANA(7262)
15
Programmable Settings
Display Language
You can select either “English” or “Spanish” as the display language. The factory
preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 63).
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse
service, set to “Pulse”. The factory preset is “Tone”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Change language” by pressing [
d
]
or [
B
], then press Select.
4 To change from English to Spanish, press
Español.
To change from Spanish to English, press
English.
• The display changes to the selected language.
• You can also select a language by pressing [
d
] or
[
B
].
5 When Spanish is selected, press Salvar, then press [OFF].
When English is selected, press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Press Select at “Set dial mode”.
5 Select “Pulse” or “Tone” by pressing [
d
] or
[
B
].
6 Press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
Change language
Back Select
K
d
BL
Display
:English
Español Save
K
L
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set dial mode
Back Select
K
d
BL
Set dial mode
:Tone
Back Save
K
d
BL